17U 19in Floor Mounted Telecom Cabinet With Corrosion Protection

1.Floor mounted Cabinet Introduction

This cabinet is 1000mm High and 700mm Wide and 770mm Deep. ET111821707710015 is an outdoor cabinet which can protect customer’s equipments from damage and extreme weather conditions. The cabinet is an ideal solution for physical connections of outdoor telecommunication equipments. Both active telecom equipments and passive telecom equipments can be accommodated inside the cabinet.

2.Cabinet Features

Compact and light single wall design

Highest protection against corrosion

Features an integrated roof

Thickness of plate: 1.2mm

Fully welded design, supplied complete, no assembly required

Surface finish: Degreasing, pickling, phosphoric wash, cleaning, and powder coated

3.Cabinet Door and Lock

The cabinet includes one front door and one back door. The cabinet door uses embedded structure. The door opening angle is larger than 110°and the door limit device can limit the opening angle. The lock is theftproof three point lock, supporting padlock. Each cabinet door include open door sensor, working together with the environment monitoring unit.

4.Optional Accessories(customized) :

● Cooling solution: Air conditioner/fan

● Power distribution unit: can meet the requirements of power system normal operation and equipments maintenance

●Sensors: can monitor internal temperature,humidity,fire/smoke,door opened state.

● Light: one piece LED tube light is for lighting insde and fixed on the top cover.

● Strong rack inside to be equipped with telecom equipments, power source, temperature control device and other attachments.

● Digital display the temperature-setting, temperature alarm, temperature parameters inside and outside, and all kinds of other alarm information, etc.

5.Cabinet Technical Parameters

6. Features

• The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment.
• Including -48VDC illumination LED lamp.
• The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. At the bottom of the cabinet, there are cable inlets separately for power cable, signal cable and optical cable.
• All the cables, sealing and heat insulation used in the cabinet are made from flame retardant materials.
• The cabinet includes 19” standard installation rack.

7. Technical Specs

(1) Applicable environment conditions:

Operating temperature: -40°C ~ + 55°C

Storage temperature: -50°C ~ + 70°C

Transport temperature: -50°C ~ + 70°C

Relative humidity (RH): 5%~99%

Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)

• Material: good quality galvanized steel
• Surface treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
• Cabinet load bearing: ≥600kg
• Ingress protection: IP65
• Flame retardance: comply with GB5169.7 test A
• Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).
• Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.

Mechanical strength: each surface can bear upright pressure >980N; after the door is open, its outer end can bear upright pressure >200N.

8.Cabinet Diagram:

9. Cabinet Pictures:

Payment & Shipping Terms:

FAQ:

1.What materials are telecom cabinets made of?

Telecom cabinets can be made from a variety of materials, but most commonly they are made from aluminum, steel, or fiberglass. The material used will depend on factors such as the environment in which the cabinet will be installed, the weight of the equipment to be housed, and the level of security required.

2.What size of telecom cabinet do I need?

The size of the telecom cabinet you need will depend on the amount and type of equipment you need to house. Generally, telecom cabinets come in various sizes, ranging from small enclosures that can fit a single piece of equipment, to large cabinets that can hold multiple racks of equipment.

3. What are the different types of telecom cabinet cooling options?

Telecom cabinets require cooling to prevent equipment from overheating. There are several cooling options available, including air conditioning units, fans, and passive cooling systems. The type of cooling system you choose will depend on the environment in which the cabinet will be installed, the amount of heat generated by the equipment, and the level of cooling required.

4.What is the lifespan of a telecom cabinet?
The lifespan of a telecom cabinet will depend on several factors, including the quality of the materials used in its construction, the level of maintenance it receives, and the environmental conditions in which it is installed. A well-maintained telecom cabinet can last for many years.

Regular maintenance is important to ensure that your telecom cabinet is functioning properly and to extend its lifespan. Maintenance tasks may include cleaning the cabinet, inspecting for damage, checking and replacing filters, and ensuring that the cooling system is working properly. It's important to follow the manufacturer's instructions for maintenance and to consult with a professional if you have any questions or concerns.

Introduction 

Tianjin Estel Electronic Science and Technology Co., Ltd (ESTEL(GUANGDONG)TECHNOLOGY CO., LTD), located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.

The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.

Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.

“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.

Company Capability

Trade & Market