Air Conditioner Integrated Galvanized Steel Outdoor Battery Cabinet
With Three Battery Layers
1. Cabinet Advantage
| 1 | Ease of access | All components are front accessible; no side or back clearance is
required. Internal components and connections are easily accessible
and/or removable through the front door. |
| 2 | Ease of Maintenance | Most power and control modules are provided in sub-assembled
chassis with plug and socket connection for easy serviceability and
minimized spare part inventory. |
| 3 | Low MTTRaintenance | Due to the ease of access to internal components and the
plug-and-socket subassemblies in addition to the availability of
self-diagnostic PCB, It is accredited for exceptionally low mean
time to repair (MTTR). |
| 4 | Ease of installation | Cabinets are floor mountable with bottom entry equipped for cable
or conduit entrance. Input, output and remote alarm connections are
wired to internal terminal lugs that are easily accessible. Top
entry is available upon request. |
| 5 | Ease of adjustment | Output voltage, current limits and alarm levels are easily
adjustable. |
2. Cabinet Features
2.1 Dimensions: W*D*H 900*800*2100mm,
2.2 Standard 19” Rack Mountable Equipment.
2.3 Dustproof, Sunproof and Rainproof.
2.4 Layout : one compartment
2.5 Electrical Grounding bar inside.
2.6 Doors: Lockable, With 1 front doors, and anti-theft 3-point
lock with padlock optional.
2.7 Installation mode: installed on a concrete floor.
2.8 Heat Insulation: 20mm PEF heat insulation between inner wall
and outer wall.
2.9 Cabling mode: routed in and out from the bottom.
2.10 Including -48VDC illumination lamp.
2.11 Accessories: PDU, Monitor, Light, Alarm Sensors (Based on
request),Batteries.
2.12 Temperature Control: AC220V air conditioner or DC48V fans.
2.13 Protection level:IP55.
2.14 Certificates:CE.
3. Cabinet Instructions
For those who need more than just standard cabinet, this series can
also offer a truly the security of customized solution with lots of
available options, providing a climate-controlled environment for
any electronic equipment, electrical load panels and cable entry
solutions. It provides a secure,climate controlled environment for
any electronic equipment.
This battery cabinet is 2100mm High and 900mm Wide and 800mm Deep.
It comes with 3 battery layers battery layers. This cabinet is the
ultimate choice for outdoor racking requirements.
4. Internal Components
- There are three layers for battery installation inside the cabinet
- There is one air conditioner installed on the front door to cool
the systemt
- There are cable holes at the bottom of the cabinet
- There is one ground bar at the bottom of the cabinet
5.Cabinet Door Lock
Damage resistance of the theft proof lock meets GA/T 73-1994
“Mechanical Anti-theft Lock” class B requirement, supporting
padlock.
Three point lock
6. Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered
Production Experience: 13 Year
