90A Outdoor Cabinet Telecom Rectifier System , DC Rectifier System
With Output Short Circuit Protection
Quick Details:
| Place of Origin: Shenzhen, China (Mainland) | Input Voltage: AC220V |
| Brand Name: ESTEL | Output Voltage: DC48V |
| Model Number: GPE4890J | Output Power: 4800W |
| Product Name: Telecom Rectifier System | Input Frequency: 45~65Hz |
| Certification: ISO9001, CE, 3C, FCC, TLC | Input Current: 42A |
| Installation Mode: 19” | Power Factor: 0.99 |
| Application: outdoor telecom cabinet | Components: 3×30A rectifier module, 1×monitoring module, power distribution |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 set |
| Price: | negotiation |
| Payment Terms: | L/C, D/A, D/P, , T/T, Western Union |
| Supply Ability: | 20,000 sets per month |
| Delivery Time: | 7-10 working days |
| Packaging Details: | carton/wooden case |
1. GPE4890J System Configuration
GPE4890J consists of distribution unit, rectifier module (up to 3
sets) and 1 monitoring module. The configuration is optional, as
following table:
| Configuration | Rectifier Module | Monitoring Module | Power Distribution | Remark |
| Standard | GPR4830 | GPM48VI (With Ethernet Port) | 4P output terminal (1×anode, 1×LVLD cathode, 1×LVBD cathode,
1×battery cathode ).
| For details, please refer to the specifications of modules. |
| Optional 1 | GPR4830 |
| Optional 2 | GPR4815 |
| Optional 3 | GPR4820 |
2. GPE4890J Working Principle
After AC power is controlled by the AC hydraulic switch and then
through the EMI board lightning protection and filtering
processing, into the rectifier module, AC hydraulic switch has the
function of overload and short circuit protection to AC power.
Under normal conditions, every parameter of rectifier modules and
distribution unit are all under control of the monitoring module,
operating according to the pre-set parameter or user’s commands. If
AC mains fault, the system will be powered by the battery. With the
battery discharge, the terminal voltage of the battery starts to
descend. When the battery voltage is under -46.2V±0.5V, the
monitoring module reports battery under voltage alarm signal; When
the battery voltage is under -45.6V±0.5V, close LVLD load output;
When the battery voltage is under -43.2V±0.5V, close LVBD load
output, then the power system stops working. When the external AC
mains recovers, the system will resume to the normal work state.
(All above monitoring data are system default values that users can
reset).
3. GPE4890J System Properties
| Input |
| Parameter | Min. | Typical | Max. | Unit | Remark |
| Input voltage range | 90 | 220 | 280 | Vac | Nominal operating voltage range 100V-240V |
| 128 | 280 | 396 | Vdc | Support DC input |
| Input frequency | 45 | 50 | 65 | Hz | AC input |
| Start inrush current | | | 42 | A | When 25°C Cold start, 280Vac input, full load test |
| Power factor | 0.99 | | | | |
| Output |
| Parameter | Min. | Typical | Max. | Unit | Remark |
| Output voltage setting | | -53.5 | | Vdc | |
| Output voltage range | -43.2 | -53.5 | -57.6 | Vdc | |
| Output current range | 0 | | 90 | A | 176~280VAC/176-396Vdc input |
| 0 | | 45 | A | 90-<176Vac/128~<176Vdc input |
| Ripple (Vp-p) | | | 200 | mv | At low temperature operating for 1 hour, apply 0.1uF film capacitor
and 10uF HF electrolyte capacitor, 20MHz frequency band 20cm
twisted pair. |
| Output efficiency | 91 | | | % | 220Vac/280Vdc input,rated output |
| 85 | | | % | 110Vac/200Vdc input, 33A output |
| Regulation | | | ±2 | % | |
| Load regulation | | | ±2 | % | |
| Voltage regulation | | | ±1 | % | |
| Output power | | 4800 | | W | 176-285Vac/176-396Vdc input |
| 2400 | | W | 90-<176Vac/128~<176Vdc input (configure GPR4830A1) |
| Insulation rating |
| Parameter | Min | Remark |
| Input - output | 3535Vdc/10mA//1min | No fly arc, no breakdown. Before the test, all the lightning
protection and surge protection devices shall be cut off from the
test points, and any rectifier module and monitoring unit should
not be installed. |
| Input-chassis | 3535Vdc/10mA//1min |
| Output - chassis | 1414Vdc/10mA//1min |
| Insulation resistance | At normal atmospheric pressure, relative humidity: 90%, testing
voltage: 500vdc, insulation of input-output, input-ground,
output-ground shall not be less than 10MΩ |
| Ambient requirements |
| Parameters | Min. | Typical | Max. | Unit | Remark |
| Operating temp | -20 | | 55 | °C | ≥ 55°C, output with derating power |
| Storage tempStorage temperature | -40 | | 80 | °C | |
| Humidity | 10 | | 90 | % | Relative humidity, no condensing |
| Atmospheric pressure | 70 | | 106 | KPa | |
| Altitude | 0 | | 3000 | m | |
| Cooling method | Forced cooling with fan |
| Ingress protection | The unit can operate when the diameter of dust particle is more
than 5µm, with density ≤3*104 /m3. The dust shall not be conducting, electromagnetic or corrosive.
The product don’t have waterproof function. |
| Mechanical specifications |
| Dimensions (Overall) | 482.6mm×265mm×88.1mm |
| Weight(kg) (Overall) | ≤11kg (Inclusive of module) ≤5.175kg (Frame + Distribution, exclusive of module) |
4. Application
(1) Small scale program controlled exchanger
(2) Access network
(3) Transmission equipment
(4) Mobile communication
(5) Satellite communication ground station
(6) Microwave communication
5. Features
(1) Adoption of active power factor compensation technology with
factor ＞0.99
(2) Wide operating range of AC input voltage: 90～280Vac
(3) Operating temperature range: -25°C～+55°C
(4) Zero current/voltage switching tech with high efficiency ≥91%
(5) Perfect battery management, charge & discharge management,
battery temperature compensation, low voltage protection, extend
battery lifetime
(6) Hot-swappable
(7) The monitor has sleeping function, saving energy.
(8) Input over/under voltage protection
(9) Output over voltage protection
(10) Output over current protection
(11) Output short circuit protection
(12) Embedded mounted
6. Electric Connection
Chassis connects with external electric through system interface
board. As shown in figure below:
Wiring terminal Connection Instruction:
SPD: lightning arrester; L: live line; N: neutral line; transfer
switch: lithium battery and lead acid battery transfer
switch,switch to I - lithium battery; O - lead acid battery;
Signal input output terminal definition as the right:
FU1: battery fuse; LOADF: load fuse; 12V-12V power supply; SPD:
lightning arrester signal;1-4: dry contact output.
Output terminal definition as the right:
BAT-: battery cathode; LOAD2-: LVBD cathode; LOAD1-: LVLD cathode;
+: Load and battery cathode
7. Packing and Shipping
Our Delivery Agent
The goods can be shipped by sea, by air, by courier, by land, by
train, etc.
Besides the following delivery agent, we can also look for the
delivery agent with the best price in china if you need us to do
for you.
8. Our Contact Information
Mobile Phone: 0086-13752765943
Telephone: 0086-0755 66600941
Email: info@estel.com.cn
lxf.estel@hotmail.com
Skype: fiona.liang10
