MPT35-12V Customized Industrial Power Supply 85~264Vac Input
Voltage
1. Power Industrial Supply Input Characteristics
| Input voltage range | 85-264Vac/120~370Vdc |
Input voltage frequency | 47-63 Hz |
input currenton | MAX. 0.95A @115 Vac, MAX. 0.56A @230 Vac |
surge current | <45A @ 230Vac |
leakage current | <0.25mA (RMS)/3.5mA(RMS) |
2. Power Industrial Supply Output Characteristics
MPT35-12V | MPT35-24V |
12V | 24V |
10.2~13.8V | 21.6~28.8V |
| 3A | 1.5A |
±0.5% | ±0.5% |
| ±0.5% | ±0.5% |
≤120mVp-p | ≤150mVp-p |
≤3s @ 115Vac；≤3s @ 230Vac |
≤50ms @ 115Vac；≤50ms @ 230Vac |
≥20 ms @ 230Vac |
3. MPT35-12V Power Supply Payment & Shipping Terms
| Minimum Order Quantity: | 1 set |
| Price: | negotiation |
| Payment Terms: | L/C, T/T, D/A, D/P, Western Union |
| Supply Ability: | 20,000 sets per month |
| Delivery Time: | 7-10 working days |
| Packaging Details: | carton/wooden case |
4. Customized Industrial Power Supply Description
The MPT35-12V industrial power supply is with input voltage range (85 to 264Vac),
with multiple way output. The power system is equipped with
protections against output short-circuit, over-current and output
over-voltage. The power supply is designed strictly in accordance
with the safety regulations, which conforms to the safety standards
and requirements of information technology.
5. 85~264Vac Input Voltage Power Supply Size Dirgram
6. ESTEL Remarks
1. Unless otherwise specified, the above parameters are tested
under the ambient temperature 25℃, humidity
50%, load 100% and input voltage 230 Vac;
2. When working above 2000 meters, the load reduction is 7%/1000
meters
3. Waves and noise measurement method: using a twisted pair wire
about 10mm long, terminal parallel 0.1 uf
and 10 uf capacitor, measured at 20 MHZ bandwidth;
4. Start time is measured in the cold start state, and rapid and
frequent switching may increase start time;
5. The power supply shall be considered as a part of the integral
part of the system. All EMC tests mounted
the test samples on a 1mm thick, 300mm long and 300mm wide metal
sheet. Verify the electromagnetic
compatibility of the power supply and the terminal equipment.
6. When the product terminal is used, the shell must be connected
to the system;
7. Test methods for all indicators in this guide are tested
7. Our Contact Information
Mobile Phone: 0086-13752765943
Telephone: 0086-0755 66600941
Email: info@estel.com.cn
lxf.estel@hotmail.com
Skype: fiona.liang10
